50 Ton Forging Press

The STP-50 50 Ton Forging Press is a four-column hydraulic forging machine that applies controlled 50-ton pressing force for hot forging and punching operations. 

50-ton pressing capacity: Provides the rated force for hot forging and punching operations within the STP-50 working range.

Controlled deformation: Hydraulic pressing applies force progressively during forming, making the machine suitable for operations that require gradual material deformation.

235 mm stroke: Provides the ram travel needed for forming and punching without requiring a larger press frame.

Four-column construction: The four-column frame provides a rigid support structure around the working area during pressing.

Controlled ram guidance: The round guide system keeps the ram movement guided and helps maintain alignment between the upper and lower tooling.

Pull-down configuration: The low-positioned working mechanism gives the press a low center of gravity for stable operation during forging.

Defined tooling envelope: The 250 × 100 mm die size provides a clear reference for checking die compatibility before purchase.

Working height: The 1250 mm bottom-die height allows buyers to check tooling position and workpiece handling against their existing forging setup.

Direct ram control: Button and foot-pedal controls allow the operator to control ram movement during forging and punching operations.

Knife & Blade Forging: Forming heated billets into knife blades, cleavers and other forged cutting tools.

Hand Tool Forging: Producing forged blanks for hammers, chisels, tongs, punches and similar blacksmithing tools.

Upsetting & Shaping: Enlarging heated bar ends and forming stepped, tapered or other shaped sections.

Punching & Piercing: Producing holes in heated forgings with suitable punches and dies.

Forge Welding: Applying controlled pressing force during forge-welding operations when the tooling and workpiece dimensions are within the machine's working range.

Hydraulic System: The hydraulic circuit and cylinder operation are checked before shipment to verify normal pressure generation and ram movement.

Ram Movement: Full-stroke operation is checked to confirm smooth downward and return movement.

Tooling Alignment: The upper and lower tooling positions are checked to verify alignment within the working area.

Control System: Button and foot-pedal controls are checked for correct response during the operating cycle.

Final Trial Run: The assembled press is operated before packing to check overall machine operation and identify abnormal operation.

80+ Years of Manufacturing: XS has manufactured machine tools since 1946, providing long-term manufacturing experience.

In-House Production: Casting, machining, heat treatment and assembly are handled within the manufacturing operation.

Inspection Capability: CMM and laser interferometer equipment are used for machine inspection and verification.

40+ Export Markets: XS equipment has been supplied to more than 40 countries and regions.